Biorix 1y ago • 100%
Hey ! Sorry I didn't saw your message. I came here to explain how I solved it (just now)!
I discovered a lot of nice option in gluetun (like port forwarding)
But turns out the solution was to change the network interface in qBittorrent options from eth0 to tun0... Simple as that
Thanks for your help!
Biorix 1y ago • 100%
About the IPs, Is the fact that docker is not per say on the same network can influence that ?
Biorix 1y ago • 100%
Thanks for the response
I checked, but the issue is still there, the IPs are the same as before, as I fixed the IP of the computer on the router. The port are forwarded manually and the server is accessible from outside the network.
The limit is set to original and upload debit, limited to 11 Mbps.
I just added all the local subnetwork IP list as you said, and the option "treat IP WAN as LAN speed" was already checked.
Secure connections are set to "preferred".
Also, I'm able to access my server directly from outside through my public IP, so the forwarding should be good.
Is there a way to see if I pass through relay instead of direct local play?
My computer crashed recently, and I had to reinstall everything. Since then, I could not have anything above 720p anywhere besides playing directly on the computer that runs plex. It looks like the maximum rate is 2 Mbps regardless of the original format. I my install is pretty much the same as before. I run plex as a docker container on Kubuntu. CPU : I5-4590 GPU : GeForce 1030 I installed the Nvidia toolbox for docker as well, and everything should be good I tried activating, deactivating HW transcoding, playing with the transcoding speed option, disabled the iGPU to use only the 1030, but nothing seems to make any difference. I first thought it was a certain format, but it seems to affect everything. I tried to optimize a file by encoding it with the plex option, but the issue stays. I thought about a network limitation, but nothing is supposed to have changed. I'm kind of clueless now on what to do next Any idea on where to look? Edit2: Solved! I unchecked the "use relay" option, and that fixed it. I still have issues with certain clients, but that's another problem. I found it odd that everything defaulted to relay when it could have direct play with certain clients. Thank you for the help!
Biorix 1y ago • 100%
Yes and they are emitting a lot of light pollution. Even more than conventional lights.
Biorix 1y ago • 100%
I do, and you're right, it was because of bracketing. I thought that this option was to set the steps of the +/- button for exposure compensation in S or A mode. I didn't think it was that, since it seems redundant with the multiple exposure option.
Anyway thanks a lot !
I have trouble understanding how to set a fix shutter speed with my camera. Once I chose a SP, my camera take the picture with the right one then if I take another one shortly after it tries to adapt the shutter speed to have more or less exposure. Is there a way to remove this option? For info, I tried in S and M mode, with manual ISO, manual focus, manual WB, and I made sure that the "multiple exposure" option was off in the setting menu.
Biorix 1y ago • 100%
Rawtherapy is really good The workflow is pretty straitforward and there's a lot of tutorials. It's really professional although it's not as easy as Lightroom.
Darktable is another good alternative but I prefer Rawtherapy
Biorix 1y ago • 100%
So it's seems to be working but all torrents are stalled for some reason
IP leaks can see their file and I can curl an IP from qflood container but somehow the torrent won't download
Biorix 1y ago • 100%
This is not a matter of different point of view but a moderation one, since they are outnumbered for now with flow of new people and bad actors.
I don't think they did it happily
But we're not concerned since this instance is smaller and probably not as much targeted
Biorix 1y ago • 0%
I do
Thank you it's really helpful
I'll try it
I'm trying to link a docker container qFlood to my VPN (proton) on the host to prevent IP leaks. When everything is on the host, I can just choose "proton0" in the network interface to use, but I don't know how to do that inside the container because this interface is not exposed to the container. Is there a way to do that? Or even to implement the VPN inside a container? What the alternative to prevent IP leaks with qBit on docker? edit: I used gluetun + qFlood as advised and it worked like a charmed except that I could't seed or leach at all Turns out the solution was to change the network interface in qBittorrent options from eth0 to tun0… Simple as that Thank you all for the help!
Biorix 1y ago • 100%
Lemmur n'est plus maintenue d'après le github.
Jerboa est la seule que j'ai trouvé qui fonctionne mais elle est en encore en alpha.
Mais depuis la migration massive, les mises à jour sont assez fréquentes (2 dans les deux derniers jours sur Fdroid) et les fonctions devraient arriver petit à petit
Pour Mastodon j'utilise Megalodon que je trouve pas mal même si je n'y passe que peu de temps.
Biorix 1y ago • 100%
I use Proton and it pretty fast IMO even without port fowarding since I can't use it.
And it has special option that prevent tracking in the event of a warrant to get your IP and also a system to avoid streaming service blocking VPNs' addresses
My second point, if you're on Linux, don't expect all the options proposed. The Linux app is pretty bad for now. No port fowarding, no split tunneling. Just kill switch
They supposed to remake it eventually... but it's been a while
So I recommend it if your on windows or Mac.
With Linux it's usable but for the price, It's not good
That being said, you can apparently use openvpn app to use it with more options, but I hadn't have the time to try it yet.
The cli Proton is supposed to have more options but I couldn't make it work even by following the doc. I might be the problem on this one.
Edit: typo
Biorix 1y ago • 100%
Thanks, that makes sense. It grew pretty fast in a few days.
Biorix 1y ago • 100%
Ok I'm seeing it now. It's empty but I assume it takes time to load. Thanks!
Any Idea on why I couldn't do it myself?
Biorix 1y ago • 100%
Biorix 1y ago • 100%
That's my understanding, but I'm trying since yesterday and still no results. From Jerboa I succeeded in finding one community, but since then, it looks like I cannot even though I'm on browser right now. edit: is it possible API are overwhelmed by the number of recent requests?
Biorix 1y ago • 100%
I'm not sure if I'm doing it correctly, but when I search for other community on other instances, it doesn't show up in the results. I tried the complete URL, the "!", the "!" plus @instance, the name alone. Is there something special to do? Is any user can look for community?
Biorix 1y ago • 100%
I'm not gonna lie, when someone calls out about censorship and not being able to talk about trans I'm inclined to think they're not people that have interesting to say.
But your comments is exactly how we should discuss a subject, thank you
Although I think that in an enormous community like reddit, YouTube, Facebook, etc. the moderation is necessarily a bit aggressive since it takes time to analyze the real intentions. And with the army of bots, and trolls organizing, or masking their intend behind falsely neutral point of view, it's easy to start blasting.
Still, I agree that lots of mods, drunk on power or following the subreddit trend was abusing and just censoring.
Ps: sorry my comment is not really a response to this one specifically haha
Biorix 1y ago • 100%
Same for me I really like KDE and their tools
I recently try to go with fedora KDE but Ubuntu and Red Hat is the only distro supported by Nvidia dockers toolbox