Is it possible? Yes. And you've mentioned stability could be an issue. I'll add that if you count your time and wasted plastics to test the thickness, infill, etc. I think it'll cost more than just buying the extrusion.

That said, if you already have core xy printer, you can start testing by replacing the frame with a printed parts. Starts with the vertical ones.

Same, but a lot closer to 2 decades. But I still pickup humble bundles from time to time. Now i finally have a device to go through them.

There’s no wattage on the 4090. 175W 4080 will outperform 150W 4090, though the 4090 has more ram, which is making this trickier.

Personally I’d take the 4080. Although I use my laptop for more things than game. More vertical pixels are nice for code editing. You’re not going to max all settings on the most recent games on either anyway.

Not OP, but probably realistic is a better word for it. OP mentioned nerdy, so maybe physically weak, shorter than average, etc. Basically the opposite of 6’+ gym rat with year round 6-pack.

Streisand Effect will kick in soon. I don’t even know any deep fake porn sites.

Can others hear whatever’s playing? Like if I’m wearing it on the bus or in library, can others hear my music?

I’ve never used one, but I’ve read reviews on the cheaper ones, they said it’s just speakers in front of your ears.

1. If micro stepping varies that much then FDM printers (and CNC machines) wouldn’t have worked so well. Also, you can tune the micro steps, if you need 410 steps to move exactly 10mm instead of the default 400, just change it. (I just pull a random number btw, it’s been at least 5 years since I touched my Marlin firmware)
2. If you’re familiar with coffee grinders, they’re basically using thread to adjust distance between 2 burrs. Even there (mid to upper-mid range ones) can’t guarantee the same grind size on the same setting for different unit of the same model, eg. setting 11 on grinder A will have slightly different result compared to another unit of grinder A on setting 11. Can it be done? Yes, one example is Commandante, that is a $300 hand grinder.

Tight tolerances will exponentially skyrocket production cost, period.

It’s extremely expensive to produce things with tight tolerances. Cheap 3D printers have gotten away with it by making things “good enough”. Which why you got this the other way around;

In short, instead of an arbitrary number like 0.3mm that has no meaning to the user, they tell the user to turn this knob 1/4 of a turn. An instruction the user can follow.

0.3mm is easy to measure with the right tool like digital indicator. On the other hand, quarter turn on a knob might adjust 0.3mm on one bolt, but 0.5mm on another.

Also as mentioned, ABL, cheap and can be DIYed. Cheap / printed parts can warped over time, bolts can shaken loose, etc. ABL just put these out of the equation.

I have the OG deck, 64GB self-upgraded to 512, and don’t have the Asus one. Ally wasn’t launched back then but there were quite a few Ayaneo ones.

My thought was this, I’m not sure you’re old enough to live through iPod days, but non Deck ones seems like the non iPod mp3 players. There were plenty of choices, cheaper (at least per GB). But 3-4 years down, when you simply need a battery replacement, which one do you think you can the replacement of? Or just look at accessories, cases, skins, etc.

You can get hundreds of performance comparisons all over youtube, I personally don’t think it matters as much. You’re not going to maxed out all the settings on either. They both can play recent games pretty well.

Turntable uses needle to feel the “bumps” and turn it into sound, if the needle can feel dusts (which is why people always wipe them before playing), it can definitely feel the layer lines.

Dusts are like what single digit microns? while the best resolution for resin printer is at 10 microns.

I just use the cheapest fruit dehydrator and snips away some of the trays.

It really depends on your lifestyle. Most machines will need some heat up time and if you're not sure you won't be pulling another shot for the rest of the day, it'll sit there, consuming like 1000+ watt of power, at least when the heater is on.

I got myself VBM Domobar (HX) more than a decade ago, and still going strong. I don't regret it. It was especially useful during covid lockdown.

Again, it really depends on your lifestyle. It is higher maintenance than any filter brewer. Demands higher end grinder, although those are much more affordable these days.

I over-bought on size and have a hopper that holds nearly a pound of beans; I rarely grind more than a shot a day, for myself.

That's what's happening in cafes with their EK43s anyway.

Does the anti-static feature really seem to work, in your experience?

Mine is the OG DF64, anti static feature is not there. RDT. I got mine because of SSP compatibility and my Eureka Mignon is showing its age. And I wanted something that can handle espresso and filter.

I've been using https://utteranc.es/, same concept but using Github issues as comment. This is interesting, especially if there's a way to handle each user's instances.

I have 64 with SSPs, and loving it.

Wasn’t the Sette higher end than DF64?

Moved to Firefox when adblock stopped working on Safari. The biggest hurdle was moving away from Keychain for password manager. Everything else was a non issue since now iOS allow others as default browser.

Email and calendar I’m on Spark, not ideal, but it works for my workflow.

Notes: Simplenote, better syncing across platforms and free.

Overcast, Spotify for music, quite generic.

What is VSO?

I just plug 500gb usb stick on my Asus router (Merlin). Install transmission, and turns on vpn and smb share. Playback is using iina on Mac, mpv on Android, and Outplayer on iOS.

That is an odd take, I mean, if there are still new games release on Switch in 20 years, then sure? Switch definitely has better chance on having newer games than DS in those time frame.

The reason for my question: I don’t want to own obsolete hardware in 10 years.

In that case, why not wait for the next gen? I have my Switch since 2018, I think, it's still the first gen one, that can be modded without hardware. I'll continue play it as long as there's a game for it. The only way to have the most time of a hardware is to get it when it's new, right?

I’m not saying the feature doesn’t exist. I’m just saying that is what happening around me. Even though our community doesn’t use imessage, Android is still the red haired stepchild.